BCDNQ - S-140 PART B
- MSDS: BCDNQ
- Manufacturer: WESTPAC PRODUCTS CO INC OF CHARLESTON
- Product Name: S-140 PART B
- National Stock Number: 8040-00N000029
Product Identification
Product ID:S-140 PART B
MSDS Date:01/01/1980
FSC:8040
NIIN:00N000029
MSDS Number: BCDNQ
Responsible Party
Emergency Phone: (803) 572-3091
Cage: 5R869
Contractor
Telephone: 415-632-3778
Cage: 5R869
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
Effects of Overexposure:PROLONGED OR REPEATED CONTACT MAY CAUSE EYE
IRRITATION,ALLEGIC SKIN IRRITATION OR DERMATITIS.
First Aid
First Aid:CAUTION:MATERIAL CONTAINS AN AMINE. IN CASE OF SKIN
CONTACT,WASH IMMEDIATELY WITH SOAP AND WATER. FOR EYES,FLUSH WITH
PLENTY OF WATER, CONSULT PHYSICIAN IMMEDIATELY. REMOVE AND WASH
CONTAMINATED CLOTH ING BEFORE REUSE.
Fire Fighting
Flash Point Method:COC
Flash Point:250F,121C
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:AVOID HIGH TEMPERATURES,OPEN FLAMES,AND
ELECTRICAL SPARKS.
Accidental Release
Spill Release Procedures:SOAK UP IN ABSORBENT AND FLUSH WITH PLENTY OF
WATER.
Handling
Handling and Storage Precautions:WARNING:MAY CAUSE SKIN SENSITIZATION
OR OTHER ALLERGIC RESPONSES. CAUSES EYE IRRITATION.
Other Precautions:USE WITH ADEQUATE VENTILATION. AVOID SKIN CONTACT AND
BREATHING OF VAPORS.
Exposure Controls
Respiratory Protection:IN CONFINED AREAS USE ORGANIC VAPOR
RESPIRATOR,NIOSH APPROVED
Ventilation:LOCAL EXHAUST-PREFERABLE;MECHANICAL(GENERAL)-ACCEPTABLE
Protective Gloves:YES
Eye Protection:SPLASH-PROOF GOGGLES
Supplemental Safety and Health
THIS IS PART B OF A TWO PART PRODUCT. SEE P/N IND. A UNDER SAME NSN.
Chemical Properties
Spec Gravity:0.9650
Appearance and Odor:LIGHT COLOR,LOW VISCOSITY,AMINE ODOR.
Percent Volatiles by Volume:0.00
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND EPOXY RESINS.
Conditions to Avoid Polymerization:STRONG ACIDS AND EPOXY RESINS.
Disposal
Waste Disposal Methods:INCINERATE UNDER APPROVED CONDITIONS OR BURY IN
APPROVED LANDFILL
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.